VroomKrazy's P.O.T.D.3-9-16
- VroomKrazy
- Full Blown BucketHead

- Posts: 991
- Joined: Mon Sep 01, 2014 9:40 pm
- Handle: VroomKrazy
VroomKrazy's P.O.T.D.3-9-16
OldRedT and me wiring up a new T-bucket for Doc. Two doors make it a lot easier to do.

- Attachments
-
- docs wiring.jpg (493.47 KiB) Viewed 314 times
- mike wade
- Full Blown BucketHead

- Posts: 5051
- Joined: Fri Jul 06, 2012 7:52 pm
- Handle: lincolnut
Re: VroomKrazy's P.O.T.D.3-9-16
Looks like a real nice shop, what with two fellows dressed in "Blue" 'work' shirts and one guy working and one guy supervising (chad you are doing a nice job)...........LOL..........
that shop is way to clean...............
Mike
that shop is way to clean...............
Mike
TODAY IS THE OLDEST YOU'VE EVER BEEN, YET THE YOUNGEST YOU'LL EVER BE, SO ENJOY THIS DAY WHILE IT LASTS
-
Uncle Larry
- Full Blown BucketHead

- Posts: 1740
- Joined: Sun Jul 08, 2012 6:34 pm
- Handle: Uncle Larry
Re: VroomKrazy's P.O.T.D.3-9-16
What year did this happen and what brand of body was it? Looks like Red was doing all the work. I know, you was supervising! Very nice setup, dash , shifter pad, floor, etc.

- VroomKrazy
- Full Blown BucketHead

- Posts: 991
- Joined: Mon Sep 01, 2014 9:40 pm
- Handle: VroomKrazy
Re: VroomKrazy's P.O.T.D.3-9-16
it was last night. It is a spirit body. I was very busy trying to look like I was busy. We have a couple more wires to hide and it should be good to go.
-
Jgard
- Junior BucketHead

- Posts: 38
- Joined: Thu Aug 06, 2015 8:54 pm
- Handle: Jgard
Re: VroomKrazy's P.O.T.D.3-9-16
Could you post or send me a picture of the cut outs where the seat sits over the battery and master cylinder. I am ready to start wiring mine and wondering if you put anything in those areas.
Thanks
Thanks
-
Jgard
- Junior BucketHead

- Posts: 38
- Joined: Thu Aug 06, 2015 8:54 pm
- Handle: Jgard
Re: VroomKrazy's P.O.T.D.3-9-16
One more question did you guys reinforce the back of the dash with wood and how are you planning to hold the steering column up? I have a spirit body and looking to learn some tips. Thanks
- IdahoRelic
- Full Blown BucketHead

- Posts: 1120
- Joined: Tue Oct 13, 2015 11:55 am
- Contact:
Re: VroomKrazy's P.O.T.D.3-9-16
WOW.... All this new stuff makes me sooooo envious. And OMG --- 2 doors, how sweet! I wonder if I could add doors to my old '63 body?
Sure would make it much easier for both of us.....
Sure would make it much easier for both of us.....
- VroomKrazy
- Full Blown BucketHead

- Posts: 991
- Joined: Mon Sep 01, 2014 9:40 pm
- Handle: VroomKrazy
Re: VroomKrazy's P.O.T.D.3-9-16
IdahoRelic where there is a will there is a way. all you need is some wood a sawzall some hinges and a latch, and you have a door or a big hole in the side of the bucket.
-
Icee McGillicuddy
- Junior BucketHead

- Posts: 10
- Joined: Mon Mar 07, 2016 1:33 pm
- Handle: Icee McGillicuddy
Re: VroomKrazy's P.O.T.D.3-9-16
I put would at the very top nothing down below. My steering column is attached at the bottom by the steering box. I didn't put a block of wood on the back of the dash where the steering column comes up against it. I drill 2 holes into the Blackwood and use the Chrome clevis that goes around the steering column up to that Block of wood with nuts in the back to support it. Once the steering column is attached to the dash, the dash becomes rigid and does not move.
-
Oldredt
- Baby BucketHead

- Posts: 2
- Joined: Fri Aug 01, 2014 1:48 pm
- Handle: Oldredt
Re: VroomKrazy's P.O.T.D.3-9-16
Mike, Blue work shirt is on me and Paul has a sweatshirt on (that should tell you who did what) :) Just giving you crap Paul, you did a lot on this one. This picture looks pretty serious the way Paul is looking at me. What the heck did I do wrong Paul ???