1923 T- Project--- SOLD---3-27-19

Buy/Sell/Trade - This board is viewable by all, but only editable by members.
Post Reply
User avatar
Dave Waldoch
Baby BucketHead
Baby BucketHead
Posts: 2
Joined: Fri Jul 13, 2012 4:16 am
Handle: 27tt
Contact:

1923 T- Project--- SOLD---3-27-19

Post by Dave Waldoch »

1923 T- Project $4950.00 ---SOLD---3-27-19
Image
For sale is a brand new Speedway Nostalgia 1923 T-Bucket Frame Assembly,
Chevy Spindles-Chrome. Part # 7151200-CHEVY-CHR.
Took delivery January 21, 2019. Unfortunately the person this t-bucket package was for
had circumstances that would not allow the completion of the project.
To allow someone to set it up the way they want, the following 3 items are not in the package.
***Universal Standard Brake Pedal Assembly, T-Bucket. Part # 9162327 kit.
***Speedway Street Rod Rear Coil Over Shock Kit, 140 lbs. Rate. Part # 2552254B need 2 kits
***Speedway Vega Style Steering Box Combo, All New Assembly. Part # 9163220 kit.
Note, the steering is set up for traditional, however, I am including the bracket for cross steering, Part # 91632005

Additional brand new Speedway items that are included in the package are listed below.
Front Disc Brake Kit GM Metric/Mustang II to 1949-54 Chevy, 5 on 4-3/4. Part # 91031956 kit.
Small Block Ford and C4 Auto Trans Mount Option for T Frame Kit. Part # 715600 already welded on the frame.
Chevy Flat Upper Steering Arm, Chrome. Part # 91632018
Chrome Plated U-Bolts. Part # 91633009
Chrome Dietz Type Headlights, Standard Bulb. Part # 91101001 pair.

Other non Speedway New items included in the package are,
1923 Model T Roadster T-Bucket Fiberglass Body, unknown manufacture,
very nice gel-coat finish and just as thick and sturdy as a Speedway body.
Extra Deep Fiberglass T-Bucket Radiator Grille Shell, Someone drilled some holes in the upper front of the shell for some reason.
T-Bucket door and jam.
T Bucket Turtle Deck. This deck came with the rest of the fiberglass parts and may or may not work with the body listed above without modifications. It is a one piece deck, the lid is not pre cut. It is 29.5” wide, 34.5” deep, 12” high front and 8” high at the back, all inside measurements. It will not fit over the gas tank in this package without modifications.
T Bucket seat insert.
10 gallon gas tank, 9”x 9”x 31”.
4 New Steel Smoothie Black rims 15” 5 on 4-3/4
and 4 new tires all mounted and balanced.

Used Items included in the package.
302 out of a 1979 F150 Ford Truck and a C-4 Trans out of same truck,
Was told motor and trans worked well when pulled. I have not run either so I am treating them as close to core prices.
Motor includes a new HEI dist and a engine gasket set.
Rear end from a 1980 Monte Carlo drum to drum or a chevy s10 rear with 373 gears shown in photos, both are non posi, your choice.
(Not in photos) Drive shaft with yoke and Steering column with GM key, unknown vehicle.
Image
Image
Image
Parts are all just hand tight for photos to help show everything included.
Rear housing is just placed up to radius rods for photos not welded yet so you can finish it the way you like.
User avatar
mike wade
Full Blown BucketHead
Full Blown BucketHead
Posts: 5047
Joined: Fri Jul 06, 2012 7:52 pm
Handle: lincolnut

Re: 1923 T-Bucket Project For Sale

Post by mike wade »

Dave that is a great looking project, if I did not already have way too many projects in the shop I would be all over this one...…...Sure is a good thing that you live a very long way from me...……..LOL..... :)! :)! :)! :)! :)! :)! :)!

Good Luck with the sale...……...... :)! :)! :)! :)! :)!
TODAY IS THE OLDEST YOU'VE EVER BEEN, YET THE YOUNGEST YOU'LL EVER BE, SO ENJOY THIS DAY WHILE IT LASTS
User avatar
Dave Waldoch
Baby BucketHead
Baby BucketHead
Posts: 2
Joined: Fri Jul 13, 2012 4:16 am
Handle: 27tt
Contact:

Re: 1923 T-Bucket Project For Sale

Post by Dave Waldoch »

Thanks Mike, I kinda wish I could keep it for da wife and have a his and hers, although it is taking plenty of time and money just to get the one done.
GTS225
Serious BucketHead
Serious BucketHead
Posts: 120
Joined: Tue Jun 25, 2013 9:29 pm
Handle: GTS225

Re: 1923 T-Bucket Project For Sale

Post by GTS225 »

Just as an FYI: That tub and interior insert looks like the pieces available from CMI Pro Glass up in Paynesville, MN. (Ebay store "rgclmc77") The molds that he uses are actually cleaned up and refurbished from the old MAS days.
As far as I know, there is no website.

Roger
User avatar
Lugnut
Full Blown BucketHead
Full Blown BucketHead
Posts: 666
Joined: Tue Oct 16, 2012 1:26 pm
Handle: Charles

Re: 1923 T-Bucket Project For Sale

Post by Lugnut »

GTS225 wrote: Thu Mar 21, 2019 7:38 pm Just as an FYI: That tub and interior insert looks like the pieces available from CMI Pro Glass up in Paynesville, MN. (Ebay store "rgclmc77") The molds that he uses are actually cleaned up and refurbished from the old MAS days.
As far as I know, there is no website.

Roger

Roger, I was going to say the same thing regarding the tub...looks like left over from the MAS days.
Post Reply

Return to “NTBA Trade Forum”